maplerpro Grandmaster Cheater Supreme
Reputation: 0
Joined: 14 Jun 2008 Posts: 1179
|
Posted: Sun Feb 21, 2010 12:30 pm Post subject: Terrible Feedback Leads Me to Replacing It |
|
|
Also, would it work if i disassemble my mic from my laptop (just use half the wire since its really long) and place it in my cam board? My cam's mic is really bad becuz of extreme feedback noise: http://vocaroo.com/?media=vymc1Tp6EKW890htc ... so would it work?
Someone said to me of a forum" | BobR wrote: | Nasty!
That's not acoustical feedback- sound coming from the speakers going back into the microphone, coming out of the speakers again and on and on, so moving the speakers won't help.
It's also not electrical interference from anything like a CRT or flurorescent light- that would be more of a low "hum" (called "60Hz noise"), so moving things physically isn't likely to do anything.
Does Microsoft have anything addressing this noise problem on their sites..? From the comments on the second link you posted, it sounds like this is a pretty common problem, and the company should be doing something to fix it." | "
btw i already tried to fix my cam's mic using fixes from http://www.daniweb.com/forums/thread66561.html
Any other way to melt wires on to a board without a solder iron?
If not, know of any reliable store in bc that lets u use theirs for free?
Thanks
_________________
|
|